REVAMPING YOUR RIDE: HOW TO TRANSFORM YOUR OLD INTO NEW CAR

TOYOTA COROLLA 1987

 Do you have an old car sitting in your driveway, longing for a fresh start? Whether it's a classic beauty or a faithful companion that's seen better days, there's something special about revamping an old car and giving it a new lease on life. In this blog post, we'll explore the art of transforming your aging vehicle into a stunning, rejuvenated ride that turns heads and feels like new again.

This is my car in the above picture and I am going to share the complete journey of transforming its old condition into new stunning looks 

Car Information and issues

Make: Toyota

Model: Corolla DX SALOON (1987)

Engine: 12 Valve, 2E

Issues

• Severe Leakage of engine oil and transmission oil
• Noisy Suspension 
• Rusted Radiator
• Dim Head Lights
• Back tail lights not working
• Faded out paint from outside
• Small rust patches
• Dirty Interior
• Dirty Engine Bay

📊 💰 "THE  MOST IMPORTANT TOTAL EXPENSE/BUDGET."

PKR rs40,000 / 146$ USD

This is the total amount I spent on it to transform it looks

SOME STEPS YOU NEED TO FOLLOW

• Start with the basics.
• First, start fixing your car mechanically.
• Then, give attention to the exterior
• Fixing Interior
• The Final Step is complete Detailing

1- ITS TIME TO GREET THE MECHANICS

While appearance is important, don't neglect the performance and reliability of your revamped vehicle.
Schedule a comprehensive inspection with a trusted mechanic to address any underlying mechanical issues and perform necessary maintenance tasks

• After a general inspection, the mechanic replaced the tapered cover seal, timing belt seal, and lower chamber seal. They also replaced the gear lower chamber nut and changed the ball joints and suspension boots. The shocks and springs were found to be in good condition. The last thing that was done was tuning the vehicle and replacing the plugs.
• The oil leakage issue was resolved and suspension noises were also resolved
• Due to tunning its fuel average turns from 9kms/L to 16kms/L
• Now it comes to cleaning the radiator and replacing rusted water with car radiator coolant
• I suspect radiator pipe leakages but they were good enough. But I strongly suggest replacing them in extreme weather conditions, especially in hot summers.
• Check Brakes, Tire condition, Wheel Balancing, and Alignment.
• Before leaving the mechanic, always remember to check the nuts and bolts of the suspension and tires. This important step will ensure your safety on the road.

2- IT IS TIME TO GREET THE ELECTRICIANS

Inspecting your car by an electrician is crucial because they can identify and rectify electrical issues that may compromise safety or performance. 

• This includes checking the battery, wiring, lights, and electronic components to ensure everything functions properly, reducing the risk of breakdowns or accidents caused by electrical failures.
• The car's front headlight and tail lamp bulbs were changed
•  its tail light covers and turning indicator covers were replaced. This is not only important for road safety but also enhances the car's exterior appearance. 

The light covers were replaced after the paint job and denting process to protect them from damage and paint overspray.

This picture was taken after the paint job

3- IT IS TIME TO GREET DENTER AND PAINTER 

As mentioned earlier, when inspecting a car, it's always important to start with the basics. Don't solely rely on the workers, as they are simply doing their job and servicing many cars. It's best to observe the car yourself. Look for any wavy surfaces or dents and inspect the entire body for rust. If any plastic parts of the car need to be removed, make sure you are present and take them with you to protect them from breaking or getting misplaced.

Note: The paint condition of the roof, trunk, and bonnet was good and original, so there was no need for me to do anything with them. However, the sides and doors were completely resprayed from the inside and outside to improve their appearance and protect them from rust.

As the car underwent its transformation, each new exterior detail ripened with anticipation, mirroring how my patience was bearing fruit with every passing moment.

Also Got the engine tapered cover repainted. will share its picture of before and after in the end

4- THE LAST STEP DETAILING/WASHING OF THE CAR

You have a choice if you want your car detailed by yourself or from trusted outside detailing service

I Detailed it myself

THERE ARE SOME TIPS

• Remove all the seats and carpets from interior 
• Remove the car battery and cover all important electrical components
• Remove water drainage rubbers from the interior
• Wash the seats and carpets with a pressure washer (Mix petrol, Cloth detergent, All Purpose Cleaner, and Water. Evenly spray them on seats and carpet, Use soft brushes to remove strain marks, At the end rinse them with water) Use this formula if you have no detailing products or no knowledge about them.
• Repeat the above step for fabric and leather parts.
• I suggest not using any acidic product for interior plastic parts as it damages the paint. 
• Use soft brushes and soft microfibers for the interior. Use the recommended All Purpose Cleaner for the interior according to your car.
• For the engine use a good quality engine degreaser or you can apply the formula I mentioned above for cleaning fabric and leather parts as I found it to be very helpful.
• Let all the stuff to dry 
• Fit them back.
  

I have also written a blog on how to wash your car at home you can read it by clicking the link given below : https://knowledgelogics.blogspot.com/2024/04/how-to-wash-car-at-home-tips-for.html

NOW I AM GOING TO SHARE THE BEFORE AND AFTER OF MY CAR

AFTER

BEFORE

INTERIOR

AFTER

BEFORE

AFTER

AFTER

EXTERIOR 😎

"Maintaining your car isn't just about preserving its condition; it's a reflection of pride and respect for the journey it takes you on. Keep it pristine, and every drive becomes a testament to your care and attention."